We’re used to having water at our fingertips. Just start the faucet, or shower, or hose, and it comes forth. The mechanical magic barely evokes thought. The water’s just reliably there.
So when something disrupts this continuity, the shock is profound and instantaneous. Minimal water pressure in the home? Worse yet, unexpectedly no water in the house? Yikes. Time to freak out.
Maybe yes … or no.
If you have no water pressure in your Milwaukee County house – kaput, out, dry, nothing coming from any faucet or spigot – chances are you require a new well pump. This pump, often called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps usually last 15 to 20 years. Their duration can be shorter or longer, depending on the water being circulated and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both at the same time is not uncommon.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Milwaukee County. Their knowledgeable professionals will troubleshoot your situation, and have your water restored within hours.
A well pump isn’t always the reason behind no water in the house. Sometimes an underground electrical wire breaks – a very repairable issue. Testing power connections is always the initial step undertaken by Kelly James Service.
If the problem is a well pump, though … then why? These pumps wear out for different reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.
So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.
Reduced water pressure in a Milwaukee County home is a different problem, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem might be a plugged iron filter – again, for Milwaukee County homes with high iron content in water.
Otherwise, the problem usually ties to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain adequate pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s health.
Frankly, reduced water pressure in a home is a headache. It’s a problem that doesn’t just go away, either. Ignoring the issue only makes it worse, as pricey equipment can be harmed or break down entirely.
The proactive measure – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of providing water solutions, their team will get your water flowing again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud Milwaukee County well pump service professionals!