We’re acclimated to having water at the ready. Just start the faucet, or shower, or hose, and it spills out. The mechanical part barely evokes thought. The water’s just always there.
So when something interrupts this reliability, the shock is significant and immediate. Decreased water pressure in the home? Worse yet, suddenly no water in the house? Yikes. Time to freak out.
Maybe yes … or no.
If you have no water pressure in your Bayside house – kaput, out, dry, nothing coming out of any faucet or spigot – probably you require a new well pump. This pump, often called a water pump, drives water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps on average operate for 15 to 20 years. Their lives can be shorter or longer, depending on the water being pumped and how they’re used. Their health often is linked with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.
What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Bayside. Their experienced professionals will analyze your situation, and have your water running again within hours.
A well pump isn’t always the reason behind no water in the house. Occasionally an underground electrical wire breaks – a very fixable issue. Checking power connections is always the initial step taken by Kelly James Service.
If the problem is a well pump, though … then why? These pumps stop operating for many reasons. Age is unavoidable. Water with high iron content will significantly shorten pump life.
So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.
Reduced water pressure in a Bayside home is a different issue, albeit usually less serious. This condition manifests itself in toilets filling slowly, or weak water volume from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a clogged iron filter – again, for Bayside homes with high iron content in water.
Otherwise, the problem usually ties to the pressure tank. Reduced or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain sufficient pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the problem only makes it worse, as costly mechanicals can be damaged or stop working altogether.
The proactive decision – whether you have minimal water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of providing water solutions, their professionals will get your water pouring again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud Bayside well pump service professionals!