We’re acclimated to having water readily available. Just start the faucet, or shower, or hose, and it comes out. The mechanical part barely registers. The water’s just always there.
So when something interrupts this reliability, the shock is significant and immediate. Diminished water pressure in the house? Worse yet, suddenly no water in the house? Yikes. Time to panic.
Maybe yes … or no.
If you have no water pressure in your River Hills house – kaput, out, dry, nothing coming out of any faucet or spigot – chances are you require a new well pump. This pump, regularly called a water pump, moves water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps usually work for 15 to 20 years. Their lifespan can be shorter or longer, depending on the water being circulated and how they’re used. Their health often is linked with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in River Hills. Their experienced team will analyze your scenario, and have your water running again within hours.
A well pump isn’t always the source of no water in the house. Sometimes an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the initial step taken by Kelly James Service.
If it is a well pump, though … then why? These pumps quit working for myriad reasons. Age is unavoidable. Water with high iron content will significantly shorten pump life.
So will running water for hours in a row, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.
Reduced water pressure in a River Hills house is a different issue, albeit usually less serious. This condition manifests itself in toilets filling slowly, or weak water volume from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a clogged iron filter – again, for River Hills homes with high iron content in water.
Otherwise, the problem usually ties to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain enough pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just go away, either. Ignoring the situation only makes it worse, as pricey machinery can be damaged or break down entirely.
The proactive measure – whether you have low water pressure in a house, or none at all – is to reach out to Kelly James Service. With more than three decades’ experience of finding water solutions, their professionals will get your water pouring again. It will be right back at your fingertips – precisely as you expect it to be. We are your proud River Hills well pump service professionals!