Low Water Pressure in your Oakwood House?

No Water? Might Require a New Well Pump … Or Something Else

We’re used to having water at the ready. Just turn on the faucet, or shower, or hose, and it comes out. The mechanical part barely registers. The water’s just dependably there.

So when something disrupts this continuity, the shock is significant and urgent. Diminished water pressure in the house? Worse yet, unexpectedly no water in the house? Yikes. Time to freak out.

Maybe yes … or no.

If you have no water pressure in your Oakwood house – kaput, out, dry, nothing coming out of any faucet or spigot – chances are you need a new well pump. This pump, occasionally called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.

Well pumps on average operate for 15 to 20 years. Their lifespan can be shorter or longer, depending on the water being pumped and how they’re used. Their well-being often ties in with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.

What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Oakwood. Their skilled team will diagnose your situation, and have your water back running within hours.

A well pump isn’t always the culprit of no water in the house. Periodically an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the first step taken by Kelly James Service.

If it is a well pump, though … then why? These pumps stop working for different reasons. Age is inevitable. Water with high iron content will significantly lessen pump life.

So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it plummets too far, can cause the water-cooled pump to overheat.

Low water pressure in a Oakwood house is a different situation, albeit usually less serious. This condition appears in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem might be a plugged iron filter – again, for Oakwood homes with high iron content in water.

Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain enough pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.

Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just go away, either. Ignoring the situation only makes it worse, as pricey infrastructure can be harmed or break down entirely.

The proactive measure – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of providing water solutions, their experts will get your water pouring again. It will be once again at your fingertips – exactly as you expect it to be.  We are your proud Oakwood well pump service professionals!