We’re acclimated to having water readily available. Just turn on the faucet, or shower, or hose, and it comes forth. The mechanical magic barely evokes thought. The water’s just reliably there.
So when something interrupts this reliability, the shock is profound and urgent. Diminished water pressure in the home? Worse yet, suddenly no water in the home? Yikes. Time to panic.
Maybe yes … or no.
If you have no water pressure in your Myra house – kaput, out, dry, nothing coming out of any faucet or spigot – very likely you need a new well pump. This pump, sometimes called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.
Well pumps usually work for 15 to 20 years. Their lifespan can be shorter or longer, depending on the water being pumped and how they’re used. Their health often ties in with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.
What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Myra. Their skilled professionals will analyze your situation, and have your water restored within hours.
A well pump isn’t always the culprit of no water in the house. Periodically an underground electrical wire breaks – a very fixable issue. Testing power connections is always the initial step taken by Kelly James Service.
If it is a well pump, though … then why? These pumps stop working for different reasons. Age is unavoidable. Water with high iron content will significantly shorten pump life.
So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it drops too far, can cause the water-cooled pump to overheat.
Low water pressure in a Myra house is a different issue, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem might be a plugged iron filter – again, for Myra homes with high iron content in water.
Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t sustain required pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, reduced water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the issue only makes it worse, as costly infrastructure can be harmed or stop working altogether.
The proactive decision – whether you have minimal water pressure in a house, or none at all – is to reach out to Kelly James Service. With more than three decades’ experience of finding water solutions, their experts will get your water flowing again. It will be once again at your fingertips – exactly as you expect it to be. We are your proud Myra well pump service professionals!