We're Your Well Pump, Water Heater & Water Softener Professionals!

 

* First Name * Last Name * Phone Need service for: Email  

Low Water Pressure in your Sylvan Mounds Home?

No Water? Might Require a New Well Pump … Or Something Else

We’re acclimated to having water instantly available. Just start the faucet, or shower, or hose, and it comes out. The mechanical part barely evokes thought. The water’s just consistently there.

 

So when something disrupts this continuity, the shock is significant and immediate. Reduced water pressure in the house? Worse yet, suddenly no water in the home? Yikes. Time to freak out.

 

Maybe yes … or no.

 

If you have no water pressure in your Sylvan Mounds home – kaput, out, dry, nothing coming out of any faucet or spigot – chances are you need a new well pump. This pump, often called a water pump, drives water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

 

Well pumps on average last 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their well-being often ties in with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.

 

What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Sylvan Mounds. Their skilled team will troubleshoot your scenario, and have your water up and running within hours.

 

A well pump isn’t always the source of no water in the house. Occasionally an underground electrical wire breaks – a very repairable issue. Checking power connections is always the initial step taken by Kelly James Service.

 

If it is a well pump, though … then why? These pumps quit working for many reasons. Age is unavoidable. Water with high iron content will significantly lessen pump life.

 

So will running water for hours on end, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.

 

Minimal water pressure in a Sylvan Mounds house is a different condition, albeit usually less serious. This condition appears in toilets filling slowly, or weak water volume from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

 

The problem might be a plugged iron filter – again, for Sylvan Mounds homes with high iron content in water.

 

Otherwise, the problem usually ties to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t sustain adequate pressure, forcing the pump to relentlessly turn on and off. Obviously, this takes a toll on the pump’s well-being.

 

Frankly, reduced water pressure in a home is a headache. It’s an issue that doesn’t just solve itself, either. Ignoring the problem only makes it worse, as costly equipment can be harmed or stop working altogether.

 

The proactive measure – whether you have minimal water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their professionals will get your water pouring again. It will be right back at your fingertips – precisely as you expect it to be.  We are your proud Sylvan Mounds well pump service professionals!

 

Call Kelly James Service for Well Pump Service near Sylvan Mounds, WI