Low Water Pressure in your Milford House?

No Water? Might Require a New Well Pump … Or Something Else

We’re used to having water readily available. Just start the faucet, or shower, or hose, and it comes forth. The mechanical part barely evokes thought. The water’s just consistently there.

So when something interrupts this continuity, the shock is undeniable and urgent. Decreased water pressure in the home? Worse yet, suddenly no water in the home? Yikes. Time to panic.

Maybe yes … or no.

If you have no water pressure in your Milford home – kaput, out, dry, nothing coming from any faucet or spigot – very likely you need a new well pump. This pump, sometimes called a water pump, pushes water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

Well pumps typically last 15 to 20 years. Their lives can be shorter or longer, based on the water being circulated and how they’re used. Their health often is linked with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.

What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Milford. Their skilled professionals will analyze your scenario, and have your water back running within hours.

A well pump isn’t always the culprit of no water in the house. Sometimes an underground electrical wire breaks – a very fixable issue. Diagnosing power connections is always the initial step taken by Kelly James Service.

If it is a well pump, though … then why? These pumps stop operating for various reasons. Age is inevitable. Water with high iron content will significantly reduce pump life.

So will running water for hours at a time, such as filling a pool or watering grass. These activities can lower the underground water table which, if it drops too far, can cause the water-cooled pump to overheat.

Low water pressure in a Milford house is a different scenario, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water volume from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem could be a plugged iron filter – again, for Milford homes with high iron content in water.

Otherwise, the problem usually ties to the pressure tank. Reduced or fluctuating water pressure means the well pump is short-cycling. The tank can’t maintain enough pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s well-being.

Frankly, low water pressure in a home is a headache. It’s a problem that doesn’t just go away, either. Ignoring the situation only makes it worse, as costly equipment can be harmed or stop working altogether.

The proactive measure – whether you have minimal water pressure in a house, or none at all – is to contact Kelly James Service. With more than three decades’ experience of finding water solutions, their team will get your water flowing again. It will be right back at your fingertips – exactly as you expect it to be.  We are your proud Milford well pump service professionals!