We’re used to having water at our fingertips. Just start the faucet, or shower, or hose, and it pours out. The mechanical part barely evokes thought. The water’s just always there.
So when something disrupts this continuity, the shock is significant and urgent. Diminished water pressure in the house? Worse yet, suddenly no water in the home? Yikes. Time to panic.
Maybe yes … or no.
If you have no water pressure in your Saylesville home – kaput, out, dry, nothing coming from any faucet or spigot – probably you need a new well pump. This pump, frequently called a water pump, pushes water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.
Well pumps on average operate for 15 to 20 years. Their lives can be shorter or longer, based on the water being circulated and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both at the same time is not uncommon.
What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Saylesville. Their knowledgeable professionals will diagnose your scenario, and have your water up and running within hours.
A well pump isn’t always the source of no water in the house. Sometimes an underground electrical wire breaks – a very repairable issue. Diagnosing power connections is always the first step undertaken by Kelly James Service.
If it is a well pump, though … then why? These pumps break down for myriad reasons. Age is unavoidable. Water with high iron content will significantly shorten pump life.
So will running water for hours in a row, such as filling a pool or watering grass. These activities can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.
Minimal water pressure in a Saylesville home is a different condition, albeit usually less serious. This condition manifests itself in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.
The problem could be a plugged iron filter – again, for Saylesville homes with high iron content in water.
Otherwise, the problem usually links to the pressure tank. Minimal or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain enough pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.
Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just fix itself, either. Ignoring the situation only makes it worse, as costly infrastructure can be harmed or quit working altogether.
The proactive measure – whether you have low water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their team will get your water pouring again. It will be right back at your fingertips – exactly as you expect it to be. We are your proud Saylesville well pump service professionals!