Low Water Pressure in your Clyman House?

No Water? Might Need a New Well Pump … Or Something Else

We’re acclimated to having water instantly available. Just turn on the faucet, or shower, or hose, and it comes forth. The mechanical part barely registers. The water’s just consistently there.

So when something interrupts this stability, the shock is undeniable and immediate. Reduced water pressure in the home? Worse yet, unexpectedly no water in the house? Yikes. Time to panic.

Maybe yes … or no.

If you have no water pressure in your Clyman home – kaput, out, dry, nothing coming from any faucet or spigot – in all likelihood you need a new well pump. This pump, regularly called a water pump, moves water from the ground into your water system’s pressure tank. It awaits use in a sink, shower or toilet.

Well pumps typically work for 15 to 20 years. Their lives can be shorter or longer, depending on the water being pumped and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both simultaneously is not uncommon.

What is the cause of no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Clyman. Their knowledgeable team will analyze your situation, and have your water back running within hours.

A well pump isn’t always the source of no water in the house. Periodically an underground electrical wire breaks – a very repairable issue. Testing power connections is always the first step taken by Kelly James Service.

If it is a well pump, though … then why? These pumps stop operating for different reasons. Age is inevitable. Water with high iron content will significantly lessen pump life.

So will running water for hours on end, such as filling a pool or watering grass. These activities can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.

Minimal water pressure in a Clyman house is a different issue, albeit usually less serious. This condition shows up in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem could be a clogged iron filter – again, for Clyman homes with high iron content in water.

Otherwise, the problem usually connects to the pressure tank. Low or fluctuating water pressure indicates the well pump is short-cycling. The tank can’t maintain enough pressure, forcing the pump to consistently turn on and off. Obviously, this takes a toll on the pump’s health.

Frankly, low water pressure in a home is a headache. It’s an issue that doesn’t just solve itself, either. Ignoring the issue only makes it worse, as costly machinery can be harmed or quit working altogether.

The proactive decision – whether you have reduced water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their team will get your water pouring again. It will be once again at your fingertips – precisely as you expect it to be.  We are your proud Clyman well pump service professionals!