Low Water Pressure in your Beaver Dam House?

No Water? Might Require a New Well Pump … Or Something Else

We’re acclimated to having water instantly available. Just turn on the faucet, or shower, or hose, and it pours forth. The mechanical part barely registers. The water’s just consistently there.

So when something disrupts this stability, the shock is profound and instantaneous. Diminished water pressure in the house? Worse yet, unexpectedly no water in the home? Yikes. Time to freak out.

Maybe yes … or no.

If you have no water pressure in your Beaver Dam house – kaput, out, dry, nothing coming out of any faucet or spigot – very likely you require a new well pump. This pump, occasionally called a water pump, pushes water from the ground into your water system’s pressure tank. It waits for use in a sink, shower or toilet.

Well pumps on average last 15 to 20 years. Their lives can be shorter or longer, depending on the water being circulated and how they’re used. Their longevity often ties in with condition of the pressure tank, as well – replacement of both at the same time is a regular occurrence.

What is the reason for no water pressure in the house? The first step is to call Kelly James Service, the well pump and water solutions provider in Beaver Dam. Their knowledgeable team will troubleshoot your scenario, and have your water up and running within hours.

A well pump isn’t always the source of no water in the house. Every now and then an underground electrical wire breaks – a very repairable issue. Testing power connections is always the initial step undertaken by Kelly James Service.

If it is a well pump, though … then why? These pumps break down for different reasons. Age is inevitable. Water with high iron content will significantly shorten pump life.

So will running water for hours on end, such as filling a pool or watering grass. These pursuits can lower the underground water table which, if it goes down too far, can cause the water-cooled pump to overheat.

Minimal water pressure in a Beaver Dam house is a different issue, albeit usually less serious. This condition appears in toilets filling slowly, or weak water output from faucets or showers. Sometimes water spits out irregularly, indicating air in the line.

The problem could be a clogged iron filter – again, for Beaver Dam homes with high iron content in water.

Otherwise, the problem usually ties to the pressure tank. Low or fluctuating water pressure means the well pump is short-cycling. The tank can’t sustain adequate pressure, forcing the pump to constantly turn on and off. Obviously, this takes a toll on the pump’s well-being.

Frankly, reduced water pressure in a home is a headache. It’s a problem that doesn’t just fix itself, either. Ignoring the problem only makes it worse, as expensive machinery can be harmed or quit working altogether.

The proactive decision – whether you have reduced water pressure in a house, or none at all – is to call Kelly James Service. With more than three decades’ experience of finding water solutions, their professionals will get your water pouring again. It will be right back at your fingertips – precisely as you expect it to be.  We are your proud Beaver Dam well pump service professionals!